Giving, theme documentation

First, thank you for purchasing our theme!

This guide provides instructions for installation, help on getting started and extensive documentation of features. It is recommended you read it thoroughly to fully leverage the Giving theme's capabilities. Please also make sure to check out our Video Tutorials as they explain everything covered in here in greater depth. We hope you enjoy building with Giving as much as we enjoyed developing it and continue to develop with new features!

Server requirements is one of the key factors for WordPress and Giving theme, it is highly recommended to use a server which supports the following requirements. We explain about WordPress, Giving, WooCommerce server requirements.

WordPress requirements

WordPress recommends following server settings.

Giving requirements

We recommends following server settings for Our WordPress Theme:

WooCommerce requirements

Giving support WooCommerce officially so it is best to make sure your server also supports this plugin requirements if you are going to set up a shop.To learn about the plugin server requirements, read the official article.

Before beginning the installation and configuring of your new theme, you must first have WordPress already installed on a server.

If you are struggling, here is a very detailed guide at Wordpress Codex that will walk you through every step.

If you prefer something more visual, you can watch this video tutorial on how to install Wordpress by us

(Please note the video shown is from our NUVO Restaurant theme, but the same process applies)

Once you have setup a copy of WordPress, there are two ways you can go about installing the theme:

• 1. FTP Upload
  

  Unzip the download and upload the theme directory /Giving/ into your WordPress themes directory /wp-content/themes/.

• 2. WordPress Upload
  

  This is definitely the easier route for most. Simply navigate to Appearance > Add New Themes > Upload. Click the 'browse' button and locate the still zipped theme folder. The theme will be uploaded and installed in a matter of seconds.

  Here is our video tutorial to help you through the process

  (Please note the video shown is from our NUVO Restaurant theme, but the same process applies)




After you have installed the theme successfully, you can optionally import the supplied dummy data in order to get a feel for things. If you're interested in importing the data, please check the Demo Data section below.

Once you have installed and activated our theme you will be prompted to install required and recommended plugins. Just click the link to Begin installing plugins.

Next, check boxes to select all the plugins you want to install, select the bulk action of install from the dropdown box and then click the button to apply.

Select the plugins you had installed, and then apply the bulk action to activate them.

Finally, you will got a confirmation notice that your plugins were activeded.

To help you set up website with the least efforts, we include in the theme package dummy content file. After installing it, all content seen on the live demo will be imported except for images/videos.

There are two methods you can use, one is using our One-click Importer, the other is Importing manually. To go with the former option, please follow the steps below:

1. Go to Install Demo on the Tools menu.



2. The Install Demo section will show for you.

3. Just click Install the demo you want and wait for the process to complete.

To be perfect, you should make sure all of photos available.

Go to Regen Thumbnails on the Tools menu.

Click Regenerate All Thumbnails and wait until the process completed.

Now you have a website just like our demo.

To imprort demo content by yourself, please follow some steps below:

1. Install and Active Widget Importer & Exporter plugin.



2. Import XML you need deactivate plugin EF3 Import And Export.

You need to extra theme package file. And then:

Step-1: Import Taxonomies

1. Go to Tools on the CPT UI menu




2. You shoud be able to find it following the path wp-giving > inc > demo-data > giving > taxonomies.json.

3. You can copy all content in file taxonomies.json and paste in here like image below:

Step-2: Import post-type

1. Go to Post Types tab.

2. Copy all content in file post-type.json in the path wp-giving > inc > demo-data > giving > post-type.json and paste in here like image below.

Step-3: Import XML

1. Go to Tools > Import.







2. You need upload two file:

Select Wordpress system then browse for the .xml file. You shoud be able to find it following the path wp-giving > inc > demo-data > giving > content > attachment-data.xml

And wp-giving > inc > demo-data > giving > content > content-data.xml

3. Choose a WXR (.xml) file to upload, then click Upload file and import.



4. You will then have the choice to import attachments, so click on the "Download and import file attachments" box.



5. Click Submit.

Repeat the steps with content-data.xml file.

Step-4: Import Options

1. Go to Red Organicfood > Import / Export on the left menu




2. You shoud be able to find it following the path wp-giving > inc > demo-data > giving > options.json .

3. You go to the option import / export in theme options then click on the button: "import this file" and copy all content in file options.json and paste in here like image below.

Step-5: Import Slider

1. Go to Slider Revolution.



2. Import slider.



3. You shoud be able to find it following the path wp-giving > inc > demo-data > giving > revslider > home.zip. You need upload all slider inside revslider file.

Step-6: Import Widgets

1. Go to Widget Importer & Exporter on the Tools menu.



2. You shoud be able to find it following the path wp-giving > inc > demo-data > giving > widgets.wie.

3. You can click button browse and upload file widget.wie



Result :

To be more perfect site you should install more photos.

1. Go to Regen Thumbnails on the Tools menu.



You just need to wait until the update is complete all photos.

You will have the perfect website.

Now you have a website just like our demo.

Breadcrumb NavXT, the successor to the popular WordPress plugin Breadcrumb Navigation XT, was written from the ground up to be better than its ancestor

This plugin generates locational breadcrumb trails for your WordPress powered blog or website.

For detailed inforamtion and support on this plugin, please go to: Breadcrumb NavXT

MailChimp for WordPress helps you add more subscribers to your MailChimp lists using various methods. You can create good looking opt-in forms or integrate with any other form on your site, like your comment, contact or checkout form.

For detailed inforamtion and support on this plugin, please go to: MailChimp for WordPress

This is plugin required all our themes

This plugin provides an easy to use interface to create and administer custom post types and taxonomies in WordPress. This plugin is created for WordPress 4.x.

If you need dedicated support for this plugin, please visit: Custom Post Type UI

Contact Form 7 is one of the most popular form builders for wordpress.

We have created styles ready for you to use within your Victoria theme.

For detailed inforamtion and support on this plugin, please go to: Contact Form 7

Delete and REALLY force the regenerate thumbnail.

Force Regenerate Thumbnails allows you to delete all old images size and REALLY regenerate the thumbnails for your image attachments.

For detailed inforamtion and support on this plugin, please go to: Force Regenerate Thumbnails

After installation, you will be suggested to install additional plugins. To install them and activate, please navigate to Plugins, you will see a list of required and optional plugins. We recommend that you install the following to get the best of our theme:

Visual Composer is the most popular drag and drop editor for wordpress.

If you need dedicated support for this component, please visit: Visual Composer on Code Canyon

Newsletter is a real newsletter system for your WordPress blog: perfect for list building, you can easily create, send and track e-mails, headache-free.

It just works out of box!

For detailed inforamtion and support on this plugin, please go to: Newsletter

WooCommerce is a free eCommerce plugin that allows you to sell anything, beautifully. Built to integrate seamlessly with WordPress, WooCommerce is the world’s favorite eCommerce solution that gives both store owners and developers complete control.

For detailed inforamtion and support on this plugin, please go to: WooCommerce

1. 1. From the 'Appearance' menu on the left-hand side of the Dashboard, select the 'Menus' option to bring up the Menu Editor.



2. 2. Select create a new menu at the top of the page



3. 3. Enter a name for your new menu in the Menu Name box.
4. 4. Click the Create Menu button. 



5. 5. Click Select to select menu created.

Your new custom menu has been defined.

You can add different link types into your menu, these are split between panes left of the menu you're currently editing.

1. 1. Locate the pane entitled Pages.
2. 2. Within this pane, select the View All link to bring up a list of all the currently published Pages on your site.
3. 3. Select the Pages that you want to add by clicking the checkbox next to each Page's title.
4. 4. Click the Add to Menu button located at the bottom of this pane to add your selection(s) to the menu that you created in the previous step.



5. 5. Click the Save Menu button once you've added all the menu items you want.

Your custom menu has now been saved.

When planning the structure of your menu, it helps to think of each menu item as a heading in a formal report document. In a formal report, main section headings (Level 1 headings) are the nearest to the left of the page; sub-section headings (Level 2 headings) are indented slightly further to the right; any other subordinate headings (Level 3, 4, etc) within the same section are indented even further to the right.

The WordPress menu editor allows you to create multi-level menus using a simple 'drag and drop' interface. Drag menu items up or down to change their order of appearance in the menu. Drag menu items left or right in order to create sub-levels within your menu.

To make one menu item a subordinate of another, you need to position the 'child' underneath its 'parent' and then drag it slightly to the right.

1. 1. Position the mouse over the 'child' menu item.
2. 2. Whilst holding the left mouse button, drag it to the right.
3. 3. Release the mouse button.
4. 4. Repeat these steps for each sub-menu item.



5. 5. Click the Save Menu  button in the Menu Editor to save your changes.

1. 1. Scroll to the bottom of the menu editor window.
2. 2. In the section titled Theme locations, click the check box for the location where you want your menu to appear.



3. 3. Click Save menu once you've made your selection.

Congratulations! Your menu has now been added to your site.

You can set any menu as Primary menu here.

Result:

The first, please go to Page > Add new in the sidebar left to create a new page.

Enter the Page title and content for page, example as image below:

Click Publish and View page to see Result:

Then, scroll down to the bottom of page to see the Page Options section. With the Page Options specially built for our themes, you can easily customize for Header, Page Title & BC and One page of every page.

General

Result:

Header

Result:

Page title & BC

Result:

One page

To set One Page for your page, you must be done some tasks. Please watch video setting one page on Haswell theme below for detail:

To create a new post, go to Posts > Add new.

1. Enter Posts name in Title field. And then enter post content into the text field.

2. Select Post Format .

3. Select a Category for posts on Categories section. Create more Category by clicking Add New Category.

4. Set posts's picture by choosing a Set featured image.

5. Finally, Click Publish.

Result:

To create a new Volunteer, go to Volunteer > Add new.

Then, enter the content for your Volunteer follow images below:

Finally, click Publish.

View page to see the result:

To create a new Event, go to Event > Add new.

Then, enter the content for your Event follow images below:

Finally, click Publish.

View page to see the result:

To create a new Donation, go to Donation > Add new.

Finally, click Publish.

Result:

The Money raise will show on Donation form:

To create a new Product, go to Product > Add new.

Finally, click Publish.

Resulr:

To set a page as Home page, go to Settings > Reading in your WordPress Dashboard panel.

1. Set "Front page displays" as "A Static Page"

2. In the drop down menu for "Front Page" choose a page which will be your home page. And in the "Posts page", choose a page whick will be your blog page.



3. Save changes.

To Add Widget on Sidebar, please following these steps:

1. 1. Navigate to Appearance > Widgets to access the list of widgets and widget section that they can be added. The left hand side show all widgets you can use. The right hand side shows all different section you can add widgets to.
2. 2. Simply drag and drop the widget you want into the widgets section you want to the right hand side.
3. 3. When you finished, make sure to click “Save” in the widget editing box to save the widgets added to your sidebar.



Go to Blog page to see Sidebar result:

The options panel is home to all of the theme's extensive configuration options. To view the panel, click on WP Giving in the left-hand menu. Here you have the ability to alter many core aspects that make up how your theme looks and behaves. Any of the options that have some ambiguity to them conviently have descriptions to explain their purpose.

Result:

The Back to top button will show on the right bottom of page when you scroll down. You can see example config result here:

This is one of most important sections for theme because this is what users see first. With our Theme Options, you will find various options to configure Header bellow:

Top Bar

Result:





Result:

Header

Result:





Result:

Logo

Result:

Mega Menu

Mega Menu: Enable it and cofig menu on the Appearance > Menu.



Result:

Menu Sticky

Sticky Header: Sticky header will show when you scroll down.



Result:

All options relating to Page Title can be found here.

Result:

Breadcrumb

Result:

Archive

Here you can config for archive, search, index... pages.



Result:

Blog Single

The options config for single blog page.



Result:

Event Single

Here you can select layout sidebar for single event page.



Result:

You can set Primary Color and Links Color here.

Result:

Not just color, all text elements are also within your control. You can define the style of Body font and H1 to H6 Headlines for yourself.

Body

Result:

Extra Fonts

On this section, Giving theme had some available fonts for you. If you want to set a special font for a special class, you only need to insert your class into Selector section, and choose the font that you want on the Font dropdown box. Finally, you click Save changes and see your result, all completed.



Example:

1. Copy class that you want to change.



2. Select typography and paste class on Selector section.



Result:

General

Result:

Newsletter

Result:



On the Mail chimp shortcode section, to get shortcode, please follow steps bellow:









Result:

Footer Top

Here you can choose column, set Background and Padding for Footer top.



Result:

Footer Bottom

Result:

Result:

Result:

All socials will show on Topbar and Footer top sections.

Result for socials show in Topbar section:

The first, please go to Page > Add New to create a new page.

Visual Composer is a powerful Wordpress page builder that allows you to create complex page layouts without touching a single line of code. To switch to Visual Composer's Backend Editor, click on this button:

When Visual Composer's editing pane comes up, click on either of these buttons to Add Element.

A shortcode selecting panel will show up, you can see all the shortcode available in the theme. Select the one you would like to use.

You will then encounter a setting panel for the shortcode (each shortcode has it own setting options), after a bit of configuration, it will show up nicely on your page.

Go to Page > Add New.

Using Visual Composer, choose Add Element.

Select CMS Dropcaps.

Result:

Go to Page > Add New.

Using Visual Composer, choose Add Element.

Select CMS FancyBox.

Result:

Result :

1. Go to Page > Add New.

2. Using Visual Composer, choose Add Element.

3. Select CMS XCarousel.

Result:

Result:

Result:

Result for Default color:

Result:

Select CMS Google Map.

CMS Google Map allows embedding a google map in Giving style.

• Address: Enter address of Map.
• Coordinate: Enter coordinate of Map.
• Click Show Info window: Click a marker and show info window.
• Marker Coordinate: To pin the marker on your location, enter Latitude, Longtitude in Marker Coordinate field.

• Marker Title: Enter title of Marker .
• Marker Description: Enter the description for Marker .
• Marker Icon: Select icon for Marker.

• Info Window Max Width: Set width for info window.
• Map Type: Select the map type.
• Style Template: Select your heading size for title.

• Zoom: Enter zoom level of map.
• Width: Enter width for Map.
• Height: Enter height for Map.
• You can select properties display for the values.

Result:

Result:

Our themes are optimized by with H1, H2, H3, H4, H5 tags, clean code, HTML5 but if you want to get higher ranking on search engines, you must need some help from SEO plugins and Google Pagespeed Service:

• Yoast SEO plugin
• Google Pagespeed Service
• Smush.it ( Optimizing Images )
• SEO Friendly Images ( SEO Images )

You can update our theme using some ways bellow

1. Update theme using Envato WordPress Toolkit

2. You can update manual theme

If you have any troubles while using auto update ( It is likely to be a permissions issue ) then you may want to manually update the theme via FTP or Cpanel.

Download the latest version of the theme on ThemeForest download page and simply replace with the old one via FTP or Cpanel.

The team at RedExp are always happy to help you with any questions or recommendations you have about the Giving theme. If you need any help or support please contact us through the TF Messaging system or
Direct at Email: support@cmssuperheroes.com
Direct at Forum: Redexp Forum.